General purpose ZNC EDM "superdrills"

Z axis machining programmable

EXCETEK Small Hole ZNC EDM Superdrills

- Dielectric work fluid = deionized (distilled) water, without additives
- Electrodes = tubular (hollow), brass or copper electrodes
- Pressure flushing through a hollow electrode

HD30Z : XY axis travel (manual) 300 × 200 // Z axis travel (programmable) × 345 mm // Workpiece weight up to 150 kg

HD35Z : XY axis travel (manual) 350 × 250 // Z axis travel(programmable) × 345 mm // Workpiece weight up to 350 kg

HD50Z : XY axis travel (manual) 450 × 350 // Z axis travel(programmable) × 345 mm // Workpiece weight up to 450 kg

Pre-programmed with 7 material types and multi-electrode size cutting conditions. User conditions may also be saved.
Z-axis auto zero function easy for monitor cutting depth.
Z-axis end of sparking with auto move up function reduce operation step.
Sparking depth electrode consumption estimates setting function.
Reduce start hole sparking burr function
Reduce in/out hole size difference function.
Standard with 3 axis build in Digital Read Out display.
Provide each axis zero key function
Inch/mm display function.

Responsive Z-axis AC servo motor.

HD30Z

In warehouse in Pomorie

HD35Z

HD50Z

Specifications	HD30Z	HD35Z	HD50Z
Worktable size (W × D)	400 × 260 mm	600 × 300 mm	600 × 300 mm
XY axes travel	300 × 200 mm	350 × 250 mm	450 × 350 mm
Z axis travel	345 mm	345 mm	345 mm
W axis Travel + Manual Guide Travel	0 + 150 mm	200 + 150 mm	200 + 150 mm
Electrode diameter	∅0,3∼3,0 mm	∅0,3∼3,0 mm	∅0,3∼3,0 mm
Max electrode length	400 mm	400 mm	400 mm
Max workpiece size	660×410×150 mm	810×430×350 mm	990×460×350 mm
Workpiece weight	max 150 kg	350 kg	450 kg
Machine weight	930 kg	1130 kg	1730 kg
Input power	4,0 kVA	4,0 kVA	4,0 kVA
Machine dimensions	1450×1250×2100 mm	1520×1287×2300 mm	3100×2500×2350 mm

* Remark: Excetek can make to order as customer requested.

* The specifications in this catalogue are subject to be change by the factory