Швидкий і надійний автоматичний механізм заправки дроту


    =Automatic Wire Threading =
заправлення дроту

  • In-gap threading (break-point threading)
  • Submerged threading (under-water threading)
  • Minimizing of operator labor in multi-window machining 


Excetek Wire-Cut EDM AWT photo
Excetek AWT

The EXCETEK AWT is very sophisticated design that provides continuous unmanned operation day and night. Unlike other systems it can thread at the point of the wire breakage.

A water jet function enables the machine to thread workpieces up to 500mm.

Non-strop operation with the ideal mechanism of automatic threading at breakage point

Submerged automatic threading at the thickness of 200 mm

Automatic threading of wire at breakage point in a workpiece 400 mm thick

Annealing wire threading

Threading Wire At Breakage Point

Annealing of wire is used to improve the wire straightness for threading. The wire can be threaded at the break point during machining with virtually 100% reliability and without the need of return to the start hole.

Submerged Wire Threading

Wire Threading can be executed easily during submerged machining and it is not necessary to drain water or refill the work tank.

Multi-Hole Machining Function

In some rare cases in continuous machining, when the machine fails to rethread into some hole at multi-hole machining, the system skips the current hole and continues to the next hole. The location of the skipped hole is automatically recorded in the data memory and it recalls the skipped hole later during the completion of the cut.

Fast Wire Threading

Excetek AWT 100 mm multi

Workpiece thickness 100 mm
Multilayer part machining 

Wire annealing and cutting : 10 sec

Threading : 10 sec

Workpiece thickness 800 mm
(V-series EDM machine-tools)

Threading under water at breakage point.

Other EDWs???